DMP 128 Plus C V / C V AT – RingCentral
3.4 Outbound Proxy
NOTE:
The following steps must be carried out in order to set the Outbound Proxy and Port Number
required for RingCentral registration.
1. Create a new blank text file using a suitable basic text editor.
2. Enter the following text into the document, replacing the '1' in 'line1' with the required
DMP line ID (1 – 8):
{"users":[{"id":"line1","outbound_proxy":"sip10.ringcentral.com",
"outbound_proxy_port":"5090"}]}
• Replace "sip10.ringcentral.com" with the Outbound Proxy Address provided by
RingCentral (Section 2.0), if different.
• Change "5090" to the Outbound Proxy Port provided by RingCentral (Section 2.0), if
different.
3. Save the file as voipConfig.conf.
Revision Date: 06/26/18
Page 8 of 14