Download Print this page

Appendix A: Rtp Port Range - Extron electronics DMP 128 Plus C V Configuration Manual

Ringcentral configuration guide digital matrix processors

Hide thumbs Also See for DMP 128 Plus C V:

Table of Contents

DMP 128 Plus C V / C V AT – RingCentral

Appendix A: RTP Port Range

The default port range for VoIP RTP traffic on the DMP is 50000 – 50999. To change this range,

the following steps must be carried out.

1. Create a new blank text file using a suitable basic text editor.

2. Enter the following text into the document (in this example, the port range is being

changed to 40000-40999; replace these values with the desired range) -

{"network":{"rtpstartport":40000,"rtpendport":40999}}

3. Save the file as voipConfig.conf.

Revision Date: 06/26/18

Page 13 of 14

Table of Contents

Dmp 128 plus c v at