DMP 128 Plus C V / C V AT – RingCentral
3.3 Line Registration
Click on the first line tab to be configured as part of the system, e.g. Line 1. Refer to the
credentials provided by RingCentral (Section 2.0).
1) User Name: Set this to match the User Name from RingCentral.
2) Authentication Name: Set this to match the Authorization ID.
3) Authentication Password: Set to match the Password.
4) Display Name: Optional. Specify an identifier for the line if required.
5) Primary Proxy Name/IP: Enter the SIP Domain
6) Primary Proxy Port: Specify the SIP Domain Port Number.
Once the above settings have been entered, click the Apply button to save to the device.
Do not attempt to register the line at this stage.
Revision Date: 06/26/18
Page 7 of 14