Runco High Definition Owner's Operating Manual page 69

Table 6-1. Serial Commands (continued)
Parameter
Command
(min/max)
Picture Adjust Commands (not available on HDMI 1 or HDMI 2 inputs)
BRIGHTNESS -100/100
BRIGHTNESS? NA
CHROMADELAY -12/12
CHROMADELAY? NA
COLOR -100/100
COLOR? NA
CONTRAST -100/100
CONTRAST? NA
FILMMODE 0/1
FILMMODE? NA
FILTER 0/15
FILTER? NA
PHASE 0/3
PHASE? NA
SHARPNESS -6/6
SHARPNESS? NA
TINT -100/100
TINT? NA
CUSTOM1 NA
CUSTOM2 NA
PRESET? NA
DAY NA
NIGHT NA
PlasmaWall XP Series Owner's Operating Manual
Value
Stored?
YES Sets a value for brightness
NA Returns brightness setting value
YES Sets a value for input color chroma delay
NA Returns input color chroma delay setting
YES Sets a value for color
NA Returns color setting value
YES Sets a value for contrast
NA Returns contrast setting value
YES Sets Film Mode off (0) or on (1)
NA Returns Film Mode setting (0 = off; 1 = on)
YES Sets a value for input color noise filter
NA Returns input color noise filter setting
YES Adjusts phase
NA Returns phase setting value
YES Sets a value for sharpness
NA Returns sharpness setting value
YES Sets a value for tint
NA Returns tint setting value
Memory Preset Commands
YES Loads "Custom 1" image preset
YES Loads "THX" ("Custom 2") image preset
NA Returns currently-selected preset
(ISF Day, ISF Night, Custom 1 or
THX/Custom 2)
YES Loads "ISF Day" image preset
YES Loads "ISF Night" image preset
Description
57
Serial Communications