Runco High Definition Owner's Operating Manual page 46

Operation
2. Double click on the Display icon.
3. Click the Settings tab on the display dialog
box.
4. Set the Screen area to 1024x768 pixels.
5. Click the Advanced button and click the
Monitor tab on the dialog box. Set the
Refresh Frequency to 60Hz and click
OK.
1. The native resolution of the PlasmaWall is 1920 x 1080. Other
Note
2. With most computers, you can get the best picture at
To prevent image retention (burn) on your display, ALWAYS use a
WARNING
screen saver and set it to the shortest possible time.
horizontal or vertical resolutions may be scaled upward or
downward to fit the display.
1024 x 768 @ 60Hz.
34 PlasmaWall XP Series Owner's Operating Manual