Runco High Definition Owner's Operating Manual page 25

1. IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2. ON / OFF
Press to turn the PlasmaWall on or off.
3. ENTER
Press to select a highlighted menu item or confirm a changed setting.
4. Cursor Keys ( ,
Use these buttons to select items or settings, adjust settings or switch display
patterns.
When no menus are present on-screen, the UP and DOWN buttons toggle through
the available aspect ratios, in this order:
UP Button = 16:9 - 4:3 - Letterbox - VirtualWide - Cinema
DOWN Button = Cinema - VirtualWide - Letterbox - 4:3 - 16:9
Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in
this order:
LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video
2 - S-Video 1 - Composite
RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 -
HD/RGB 2 - HDMI 1 - HDMI 2
5. RETURN / EXIT
Press this button to exit the current menu and return to the previous one.
Not all remote control units have this button. If yours does not, use
Note
the MENU button (see below) to exit the current menu.
6. LIGHT
Press to illuminate the buttons.
7. MENU
Press this button to show or hide the OSD controls.
8. VIDEO (1)
Press to select Composite video input as the source or to enter the numeric
character "1."
9. COMP (Component) (2)
Press to select Component SD (480i/576i) video input as the source or to enter the
numeric character "2."
PlasmaWall XP Series Owner's Operating Manual
, , )
13
Controls and Functions