Owner'sinstruction; Cooling Mode - Standard Operation; Cooling Mode - Power Cooling; Auto Operation Mode - LG AMNC12GTRA2 Owner's Manual

OWNER'S INSTRUCTION
Cooling Mode
- Standard Operation
1
. Press the ON/OFF button.
The unit will respond with beep sound.
2
. Press MODE button to select Cooling
Mode.
3
. Set the desired temperature by pressing
TEMP button.
Press ROOM TEMPERATURE CHECKING
button to check the room temperature.
When setting the desired temperature is
higher than room temperature, cooling
wind isn't blow out.
• Setting Temp. Range : 18-30°C(64-86°F)

Cooling Mode - Power Cooling

1
. Press the ON/OFF button.
The unit will respond with beep sound.
2
. Press MODE button to select Cooling
Mode.
3
. Press the JET COOL button. The unit will
operate in super high fan speed in cooling
mode.
• Wall mounted models operate power
cooling mode for 30 minutes.
4
. To cancel the Power cooling Mode press
the Jet Cool button or the fan button or the
room temperature setting button again and
the unit will operate in high fan speed in
cooling mode.
OWNER'S INSTRUCTION

Auto Operation Mode

1
. Press the ON/OFF button.
The unit will respond with beep sound.
2
. Press MODE button to select Auto Opera-
tion Mode.
3
. Set the desired temperature.
<For Cooling Model>
The temperature and fan speed are automati-
cally set by the electronic controls based on
the actual room temperature.
If you feel hot or cold, press TEMPERATURE
SETTING buttons for more cooling or heating
effect.
You cannot switch the indoor fan speed. It has
already been set by the Auto Operation Mode
rule.
During Auto Operation Mode
• If the system is not operating as de-
sired, manually switch to another
mode. The system will not automati-
cally switch from the cooling mode to
the heating mode, or from heating to
cooling, then you must set the mode
and the desired temperature again.
11