Table of Contents
Advertisement
90
Podcasts and your gigabeat®
Setting up a Wireless LAN connection
5
Specify the connection settings.
Enter the same encryption settings and encryption key as those
specified for your access point.
Network Name
Enter the same network name (SSID) as your access
point.
Security Type
Select an authentication method. It should be the same as
the authentication method set for the access point.
No Authentication (Open System): Authentication is
not performed.
Common Key: WEP authentication method WPA
Personal: WPA authentication method
WPA2 Personal: WPA2 authentication method
Encryption type
Select an encryption method: It should be the same as the
encryption method set for the access point.
None: Encryption is not performed.
WEP: WEP encryption method
TKIP: TKIP encryption method
AES: AES encryption method
Network Security Key Enter a security key. Enter the same key set for the access
point.
For information on how to enter a security key, refer to
"How to enter from the keyboard screen" on page 91.
Key Index
If WEP has been selected, select 1, 2, 3 or 4. The key
index should be the same as the one set for the access
point.
Proxy
Enter a proxy. For information on how to enter a proxy,
refer to
page
Automatically Acquire
Yes: Select this option if the access point supports DHCP.
IP Address
When this option is set, an IP address will be assigned
automatically.
No: Select this option if the access point does not support
DHCP. When No is selected, set the IP Address, Subnet
Mask, Default Gateway and Automatically Acquire DNS
Server Address fields.
"How to enter from the keyboard screen" on
91.
Advertisement
Table of Contents
