Retrieving Photo Data From A Digital Camera - Toshiba MET401 User Manual

Retrieving photo data from a digital camera

Retrieving photo data from a digital camera
You can connect the gigabeat
device, PTP digital camera, etc., and transfer the photo data saved
in the connected device, digital camera, etc., to the gigabeat
Note that the above operation does not guarantee proper data
transfer from all devices.
A USB conversion cable is needed to connect the gigabeat
digital camera. Purchase a USB conversion cable of "A connector
(female) – Mini B connector (male)" type. (Recommended product:
XXXXX)
1 Connect the digital camera and gigabeat
conversion cable (purchased by the user).
USB cable that came with
the digital camera
(Sample Illustration)
2 Turn on the gigabeat
Depending on the digital camera, the camera may power up
automatically when the gigabeat
The confirmation message "Do you want to transfer data to the
gigabeat?" will appear.
3 Select Yes, and press the Enter button.
Photo data, video data and other transferable data currently
saved in the digital camera will be transferred.
Photos and your gigabeat®
®
directly to a USB mass storage
®
using a USB
Mini B connector
A connector
USB conversion cable
(purchased by the user)
®
, and then turn on the digital camera.
®
is turned on.
57
®
.
®
to a