Table of Contents
Advertisement
18
Getting Started with Your gigabeat®
Installing the software
®
Charging the gigabeat
❖
Connect the gigabeat
USB cable.
❖
Make sure your computer is connected to the AC adaptor.
❖
Turn on your computer.
❖
Even if the gigabeat
automatically and the built-in battery will start to charge.
❖
When Windows Media
message "The gigabeat is now connected" may appear on the
®
gigabeat
screen depending on the condition of your computer.
In this case, refer to
gigabeat®" on page
❖
The battery icon in the bottom right-hand corner of the screen
will change to indicate that the built-in battery is now
Battery icon
Additional information
❖
If the gigabeat
in battery may still drop even while it is charged via USB
connection.
❖
The built-in battery may not be charged via USB connection on
certain computer models with a USB bus power-supply
function that does not support this charge mode.
❖
If the gigabeat
support USB charge, the gigabeat
immediately and the USB function of your computer may be
temporarily disabled. If this happens, remove the gigabeat
restart your computer.
❖
Proper operation is not guaranteed when the gigabeat
connected to a computer using a USB hub.
❖
You can also charge the gigabeat
adapter (model: MEPUAA10) which is sold separately.
®
to your computer using the provided
®
power is not turned on, it will power up
®
Player is open on your computer, the
"Connecting your computer and the
20.
Condition of built-in battery
Charging
Recharge complete
®
is operating, the power remaining in the built-
®
is USB-connected to a computer that does not
®
may be disconnected
®
using a dedicated USB AC
charging.
®
and
®
is
Advertisement
Table of Contents
