Precautions
5.2 Rear Cover
1. Remove the six screws securing the Rear Cover.
5.3 Removing the LIU PBA
1. Before you remove the Scanner Ass'y, you should
remove:
- Rear Cover (see page 5-1)
2. Remove the screw securing the Cover Panel MFP
Service Manual
5-2
2. Separate the rear cover from the base frame and
Scanner Ass'y.
3. Remove 2 screws securing the PBA and disconnect
the LIU harness. Release the plastic supporting clip
and remove the LIU
LIU Harness
LIU Harness
Supporting Clip
Supporting Clip
Rear Cover
Screw
Screw
Screw
Screw
Samsung Electronics