Operation - Dometic 8700 Series Operation Manuals

Masterflush macerator toilet
Hide thumbs Also See for 8700 Series:
Table of Contents

Advertisement

Maintenance, Winterizing
6.3.1
Normal toilet operation -
Dometic flush handle and status panel
ADDING WATER TO TOILET BOWL
Lift flush handle until desired water level is achieved . (Water flow will shut off
automatically if switch is pressed too long to avoid overflow .) More water is
usually added only when flushing solids .
FLUSHING TOILET
Press flush handle down, then release it . This activates a powerful macera-
tor pump that siphons water and waste from the bowl, macerates, and
propels the effluent through the discharge line to the holding tank .
Caution – Do Not Flush Foreign Objects!
Flush only water, bodily wastes and rapid-dissolving toilet
tissue . Do not flush wet wipes, sanitary napkins, condoms,
diapers, paper cups, cotton swabs, food, hair or liquids such
as oils or solvents as clogging or damage to the toilet or toilet
system may occur .
Note
Make sure all guests understand toilet operation before use .
6.3.2
Changing flush modes
Dometic 8700 series MasterFlush toilets offer two flush settings to help manage water consumption:
Normal flush – Uses 0 .85 gal . (3 .2 liters) per flush . Adds water to bowl after every flush .
Dry Bowl flush – Uses 0 .45 gal . (1 .7 liters) per flush . Does not add water to bowl after flush .
To change from Normal to Dry Bowl flush setting, press flush handle for about five seconds .
When "Power On" light (fig .
Flush mode has been changed to Dry Bowl setting . Change mode to
Normal flush by following the same procedure .
6.3.3
Indicator lights
"POWER ON" INDICATOR
On the Dometic DSS status panel, a steady green "Power On" light
5
(fig .
1) indicates when electrical power to the toilet is activated .
A momentary flashing green light indicates when flush mode is changing .
TANK LEVEL INDICATOR
The Dometic DSS status panel includes a bi-color "3/4 Full" (amber) and "Full" (red) Tank Level light
(fig .
2) to indicate when the holding tank is 75% or 100% full (if connected to a two-level tank
5
monitoring system) and should be pumped out . When the red light is illuminated, electrical power to
the toilet automatically shuts off to prevent overfill of the holding tank .
8
1) begins flashing, release flush handle .
5
Dometic 8700 Series MasterFlush Toilet
ADD WATER TO BOWL
FLUSH
5
1
DSS STATUS PANEL
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Masterflush 8700 series

Table of Contents