Components; Specifications - Dometic 8700 Series Operation Manuals

Dometic 8700 Series MasterFlush Toilet
4

Components

1
(fig . , page 2)
Ref. Description
A Macerator toilet
B Dometic DFT flush switch
C Control module
D 4-wire cable to toilet macerator
pump and water valve
E Cable for Dometic DFT flush switch
or DSS status panel (RJ45/ethernet)
F Cable to toilet's electronic flush
handle (for flush handle model)
G Incoming electrical power wires
H Power wires to raw water pump (opt .)
I Wire for "3/4-full tank" signal
J Wire for "full tank" signal
K Floor mounting hardware kit
L Floor mounting template
M Flush handle (for flush handle model)
N Dometic DSS status panel
(for flush handle model)
O Cable for flush handle and other mfr .
status panel (for flush handle model)
5

Specifications

5.1 Materials
Toilet: vitreous ceramic
Macerator pump body: glass-filled polypropylene
Control module housing: ABS
2
(fig . , page 2)
Ref. Description
1 Anti-siphon valve
2 Vacuum breaker
3 Discharge loop outlet
4 Discharge adapter fitting
5 Discharge hose fitting
6 Macerator pump
7 Water valve
8 Water line - 0 .5 in . NPT fitting
9 4-pin cable connector
10 Flush handle
(on flush handle model only)
11 Flush handle cable connector
Refer to complete parts list (packed separately)
for additional information .
Dometic DFT switch panel frame: ABS
Dometic DFT switch panel: polycarbonate resin
Flush handle: plated brass (on applicable toilet
models)
Intended use
5