Backing Up/Restoring Your Configuration - Technicolor TG789vac v2 Setup And User Manual

3.2 Backing up/restoring your configuration

Introduction
Once you have configured your TG789vac v2 to your needs, it is recommended to backup your configuration for later use.
This way you can always return to your working configuration in case of problems.
Backing up your configuration
Proceed as follows:
1 Browse to the TG789vac v2 GUI.
For more information, see
2 On the MediaAccess Gateway menu, click Configuration.
3 In the Pick a task list, click Save or Restore Configuration.
4 Under Backup current configuration, click Backup Configuration Now.
5 The TG789vac v2 prompts you to save your backup file.
Do not change the file extension.
6 Save your file to a location of your choice.
Do not edit the backup files as this may result in corrupt files making them worthless as configuration backup.
Restoring your configuration
Proceed as follows:
1 Browse to the TG789vac v2 GUI.
For more information, see
2 On the MediaAccess Gateway menu, click Configuration.
3 In the Pick a task list, click Save or Restore Configuration.
4 Under Restore saved configuration, click Browse and open your backup file.
Backup files usually have .ini as extension.
5 The TG789vac v2 restores your configuration.
6 If needed, the TG789vac v2 will restart.
DMS3-CTC-25-282 v1.0
"Accessing the TG789vac v2 GUI" on page
"Accessing the TG789vac v2 GUI" on page
29.
29.
3 Configuration tools
33