Dts Neo:6 Sub-Menu Dolby Pro Logic Ii Sub-Menu; Speaker Setup Menu - Rotel Surround Sound Receiver RSX-1055 Owner's Manual

of CINEMA, MUSIC, or EMULATION settings.
DTS Neo:6 decoding offers a choice of CIN-
EMA or MUSIC settings. When either Dolby
Pro Logic II or DTS Neo:6 is selected with this
menu item, the current setting choice will also
be displayed. In addition, the function of the
ENTER button changes, taking you to a sub-
menu where you can change the settings and/
or additional parameters for Dolby Pro Logic
II or DTS Neo:6 decoding. See the following
section for details.
To return to the MAIN menu (except when Dolby
Pro Logic II or DTS Neo:6 is selected in the
SURR MODE field), press the ENTER button.
Press the MENU key on the remote to cancel
the menu display and return to normal opera-
tion.
: We suggest that you return to this menu
NOTE
after connecting each source component to
properly configure that source.
DTS Neo:6 Sub-Menu
DOLBY PRO LOGIC II Sub-Menu
DTS Neo:6
MODE: CINEMA
ENT KEY=input setup
+/– KEY=change
When Dolby Pro Logic II or DTS Neo:6 is
selected as the default surround mode on the
INPUT SETUP menu (see previous section), there
are additional option settings and parameters
available to optimize the surround decoding
for various types of recordings, music or movie
soundtracks.
These settings are changed using one of the
DOLBY PRO LOGIC II or DTS Neo:6 sub-menus,
reached by pressing the ENTER key from the
INPUT SETUP menu when either of these sur-
round modes is selected.
The sub-menu will be similar to the example
shown above, with the title at the top of the
screen indicating either DOLBY PRO LOGIC
II or DTS Neo:6 depending on the surround
mode.
29
In DTS Neo:6 surround mode, there will
only be one choice available on the sub-menu:
selecting CINEMA or MUSIC modes. Use the
+/– keys on the remote to change the settings.
• Select CINEMA to optimize the DTS Neo:6
decoding for movie soundtracks.
• Select MUSIC to optimize the DTS Neo:6
decoding for musical recordings.
In Dolby Pro Logic II surround mode,
there will a similar choice available on the sub-
menu except that there are three options:
CINEMA, MUSIC, or EMULATION modes. Use
the +/– keys on the remote to select a mode.
• Select CINEMA to optimize for Dolby
Surround encoded movie soundtracks, using
the enhanced matrix decoding of Dolby
Pro Logic II including increased surround
separation and full-bandwidth surround
channel frequency response.
• Select EMULATION decoding logic that
emulates the original Dolby Pro Logic sys-
tem. You may prefer this option for older
movie soundtracks that are not of optimum
audio quality. EMULATION mode reduces
the high-frequency response and separa-
tion of the surround channels and may in-
crease the delay setting to the surround
channels for a more spacious effect.
• Select MUSIC to optimize for musical re-
cordings. When the MUSIC mode is se-
lected, three additional parameter will be
available as shown in the following screen:
DOLBY PRO LOGIC II
MODE: Music
OPTIONAL PARAMETERS
PANORAMA: Off
DIMENSION: 3
CENTER WIDTH: 0
ENT KEY=input setup UP KEY=up
+/– KEY=change DWN KEY=down
Use the UP/DOWN keys on the remote to select
a parameter. Use the +/– keys to change the
selected parameter as follows:
• PANORAMA: The Panorama option
extends the front stereo image to include
the surround speakers for a dramatic "wrap-
around" effect. The options are OFF or ON.
• DIMENSION: The Dimension option al-
lows you to gradually adjust the soundfield
towards the front or towards the rear. There
are seven incremental settings from 0 to
6. A setting of 0 shifts the soundfield to-
wards the rear for maximum surround ef-
fect. A setting of 6 shifts the soundfield to
the front for minimum surround effect. The
default setting of 3 provides a "neutral"
balance between the two extremes.
• CENTER WIDTH: The Center Width option
allows you to spread the signal intended for
the center speaker to the left and right front
speakers, widening the perceived soundfield.
There are eight incremental settings from 0
to 7. With the default setting of 0, there is
no center width spreading and all of the center
channel information is sent to the center
speaker. The maximum setting of 7 shifts all
of the center channel signal to the left and
right speakers, essentially muting the center
speaker and maximizing the soundfield width.
Other settings provide incremental steps be-
tween the two extremes.
When you have completed all the desired
adjustments, press the ENTER key to return to
the INPUT SETUP menu.

SPEAKER SETUP Menu

SPEAKER SETUP
FRONT: Large
CENTER: Large
SURROUND: Large
CENTER BACK: Large
SUBWOOFER: Yes
CB SPKR SEL: 1 SPEAKER
ENT KEY=MAIN MENU UP KEY=up
+/– KEY=change DWN KEY=down
The SPEAKER SETUP menu is used to config-
ure the RSX-1055 for use with your specific
loudspeakers. The menu is accessed from the
MAIN menu.
Home theater systems vary in the number of
speakers and the bass capabilities of those
speakers. The RSX-1055 offers surround modes
tailored to systems with various numbers of
speakers and bass management features which
send bass information to the speaker(s) best
able to handle it – subwoofers and/or large
speakers. For optimum performance, you must
tell the RSX-1055 the number of speakers in
your system and how bass should be distrib-
uted among them.
English