Power Supply Connection - Raymarine ST4000+ Owner's Handbook Manual

81131_8.book Page 42 Thursday, October 7, 2004 11:03 AM
42

Power supply connection

• The autopilot requires its own dedicated power supply – it cannot
source its power from SeaTalk. However, it can be used to supply
power to other SeaTalk instruments.
• You must fit a12 A fuse (or equivalent circuit breaker) to the
+12 V supply.
• As standard, we supply a 1 m (3 ft 3 in) power cable terminated
with
• You can extend the power cable if required. The following table
shows the minimum acceptable cable sizes:
ST4000+ Wheel & Tiller Autopilots: Owner's Handbook
Brown (+) Blue (-)
1
/ inch spade connectors.
4
12 A fuse
(or equivalent
circuit breaker)
Power
Blue (-)
cable
Brown (+)
D3286-3
+12 V
power
supply
D3287-2