Important Electrical Instructions - Spirit CT900ENT Owner's Manual

• ASTM F2115-05 Specifications 6.1.2.11—The recommended minimum clearance required around each
treadmill for access to, passage around, and emergency dismount shall be stated. The minimum dimensions are
to be: 0.5 m (19.7 in.) on each side of the treadmill, and 1 m (39 in.) behind the machine.
SAVE THESE INSTRUCTIONS - THINK SAFETY!

IMPORTANT ELECTRICAL INSTRUCTIONS

WARNING
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with
a large motor, the GFCI will trip often. Route the power cord away from any moving part of the treadmill
including the elevation mechanism and transport wheels.
NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%) or
more, the performance of your treadmill may be affected. Such conditions are not covered under your
warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for
proper testing.
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a pool
or spa or in any other high humidity environment. The operating temperature specification is 40 to 120
degrees Fahrenheit, and humidity is 95% non-condensing (no water drops forming on surfaces).
Circuit Breakers: Some circuit breakers are not rated for high inrush currents that can occur when a treadmill
is first turned on or even during use. If your treadmill is tripping the circuit breaker (even though it is the proper
current rating) but the circuit breaker on the treadmill itself does not trip, you will need to replace the facility
4
Spirit Fitness