Downloading Telephone Number; Printer Configuration; Printer Language Option; Print Event Buffer - DSC PC2585 Installation Manual

[48]

Downloading Telephone Number

This is the telephone number that the panel would use to call the downloading computer if the Callback feature (Section
[44]) is enabled or if a user initiated call up is performed with the [ ][6][Master Code][9] command.
[49]

Printer Configuration

Zone Light 1 • OFF = Not 110 baud
ON = 110 baud
Zone Light 2 • OFF = Not 300 baud
ON = 300 baud
Zone Light 3 OFF = Not 1200 baud
• ON = 1200 baud
Zone Light 4 • OFF = Printer and normal communication
ON = Printer only
Zone Light 5 • OFF = Printer and normal communication
ON = See notes below
Zone Light 6 • OFF = SRTS on pin 11
ON = RTS on pin 4 or DTR on pin 20
Zone Light 7 • OFF = For Future Use
ON = For Future Use
Zone Light 8 • OFF = For Future Use
ON = For Future Use
• = Default setting
PRINTER CONFIGURATION NOTES:
If Zone Light 5 is ON and Zone Light 4 is OFF: All items whose reporting codes are programmed for Communications
Buffer 1 will be communicated to the monitoring station AND printed on the printer. All items whose reporting codes
are programmed for Communications Buffer 2 will NOT be communicated to the monitoring station but will be printed
on the printer.
If Zone Lights 4 and 5 are OFF: All items whose reporting codes are programmed for Communications Buffer 1 or
2 will be printed on the printer and communicated to the monitoring station.
If Zone Light 4 is ON: All items whose reporting codes are programmed for Communications Buffer 1 or 2 will be
printed on the printer but will not be communicated to the monitoring station. In this case it is assumed that telephone
lines are not connected. DO NOT disable the communicator. The First System Option Code, Zone Light [1] must be
OFF. To avoid TLM trouble, program Second System Option Code Zone Light [1] to be ON.
[50]

Printer Language Option

Enter a 2-digit number to select the language to be used with the serial printer. The default setting is 03 for German.
Enter: 00 for English
01 for French
02 for Dutch
03 for German
Refer to Printer Set-up for instructions on connecting a printer to the control panel, and for instructions on programming
the control panel for use with a printer.
[89]

Print Event Buffer

If a serial printer is connected to the system, entering [ ][8][Installer's Code][89] will print the 128 events in the event
buffer. Events, along with the time and date of each event, are printed with the most recent event first, and the oldest
event printed last. The keypad will sound a tone to indicate when the system has finished printing all of the events in
the event buffer, or if the printer is not connected properly.
NOTE: Refer to Printer Setup for instructions on connecting a local printer to the control panel.
35