Operate Gemini Utilities; Start Gemini Utilities; Change The Autoloader Display Name; Enable The Beeper - Rimage Catalyst 6000 User Manual

Operate Gemini Utilities

Operate Gemini Utilities
The Rimage Software Suite includes an application called Gemini
Utilities, which is used to change the display name of the Catalyst
system and to configure the beeper settings.
Tip: To access Gemini Utilities for the Catalyst 6000N, use the remote
desktop connection from a networked PC, or connect a monitor,
keyboard, and mouse to the Catalyst 6000N.
Note: Unless otherwise indicated, all Windows navigation statements
are Windows 7 paths. Other Windows operating system navigation
may differ slightly.

Start Gemini Utilities

1. Close all open software applications and stop all Rimage Services.
Note: Refer to your Rimage Software online help for additional
information.
2. From the Windows Start menu select: All Programs > Rimage >
Utilities > Gemini Utilities. Gemini Utilities opens.
Note: When the desired tasks are complete in Gemini Utilities,
remember to restart the Rimage Services.
2003484_A
For more information visit www.rimage.com/support

Change the Autoloader Display Name

Use Gemini Utilities to enter the name displayed on the operator
panel.
1. Select the Override Name checkbox.
2. Clear the Use Computer Name checkbox.
3. In the Display Name field, enter the new name.
4. Select Set Params to set the name.
5. Select Exit to close Gemini Utilities.

Enable the Beeper

You can change the number of beeps that occur when the system
requires user intervention, such as when out of media or in an error
state.
1. In the # of Beeps on Fault field, select the number of beeps you
wish to hear when there is an error.
Tip: To disable the beeper, set the number to zero.
2. Select Set Params to set the number of beeps.
3. Select Exit to close Gemini Utilities.
12