Samsung SCW-R500 User Manual page 6

SCW-R500 1/9/99 12:06 PM Page 8
Setting up your terminal
Screws and Caps are provided for mounting the unit on a wall.
Screws and Caps are recommended for most wall surface.
For wooden wall installations, only the screws are required.
1
Mark four mounting hole locations on the wall.
2 Drill four holes at the marked location.
3 If not using Caps, drill four holes in the wood.
If using Caps, drill four holes at the marked location.
Insert the Caps into the holes and tap the Cap heads flush against the wall.
4 Remove wall mountable bracket cover from wall mountable bracket.
5
Attach the wall mountable bracket.
6 Tighten the screws firmly.
7 Put a cover to wall mountable bracket.
8 Plug in the RJ-11 Phone Port and Power Connector and route the cords in a
groove.
9 Screw the antenna into antenna connector.
10 Install the FWT onto the wall mountable bracket hook.
FWT Wall Mount Installation
Wall
Setting up your terminal
Wall mounting Caps(4)
Wall mountable bracket hook
Wall mountable bracket
Screws(4)
Wall mountable bracket Cover