Setting Up Your Terminal - Samsung SCW-R500 User Manual

SCW-R500 1/9/99 12:06 PM Page 6

SETTING UP YOUR TERMINAL

This FWT SCW-R500/R510 operates by receiving electricity from an electrical
outlet or external power supply.
1 Connect the terminal mounted Antenna on the side of the terminal.
2 Connect a conventional wired telephone to a RJ-11 phone port.
(SCW-R500: 3 RJ-11 phone ports / SCW-R510: 2 RJ-11 phone port)
Use the telephone compatible to FCC part 68 as possible, otherwise it
may not work properly.
FWT works only tone dialing.
3 Plug the AC adaptor output into the rear DC 9V jack of the Terminal.
4 Plug the AC adaptor plug into an appropriate electrical outlet.
5 Connect a G3 analog facsimile machine to a dedicated RJ-11 port.
(only for SCW-R510)
The usage of RS-232C connector on the base of the FWT is not user but
dealer's maintenance.
1
5
3
2
4
How to install External Power Supply(option)
1
Connect the DC power cable to External power supply.
2 Connect the DC power cable to FWT.
3 Connect the AC power connector to External power supply.
4
Plug the AC power connector to wall outlet.
5 Connect a wired telephone to a RJ-11 phone port
5
2
Setting up your terminal
3
1
4