Enhance; Scene Mode Scheduler; Encoder Profile - Bosch AUTODOME IP 4000i User Manual

30 en | Camera
6.5

Enhance

Sharpness level
The slider adjusts the sharpness level between -15 and +15. Zero position of the slider
corresponds to the factory default level.
A low (negative) value makes the picture less sharp. Increasing sharpness brings out more
detail. Extra sharpness can enhance the details of license plates, facial features and the edges
of certain surfaces but can increase bandwidth requirements.
Backlight compensation
Select Off to switch off backlight compensation.
Select On to capture details in high-contrast and extremely bright-dark conditions.
Contrast enhancement
Select On to increase the contrast in low contrast conditions.
Intelligent Dynamic Noise Reduction
Select On to activate intelligent Dynamic Noise Reduction (DNR) which reduces noise based
on motion and light levels.
Temporal noise filtering
Adjusts the temporal noise filtering level between -15 and +15. The higher the value, the more
noise filtering.
Spatial noise filtering
Adjusts the spatial noise filtering level between -15 and +15. The higher the value, the more
noise filtering.
Intelligent Defog
With the Intelligent Defog mode feature, visibility can be improved significantly when viewing
foggy or other low-contrast scenes.
Select Auto to activate the Intelligent Defog feature automatically as needed.
Select Off to disable the feature.
Note: When the camera is in an indoor room that often has smoke or has low-contrast and the
camera monitors an area facing the outdoors (such as large windows), Bosch recommends to
select option Auto.
6.6

Scene Mode Scheduler

The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
2.
3.
6.7

Encoder Profile

For the video signal encoding, you can select a code algorithm and you can change the presets
for the profiles.
You can adapt the video data transmission to the operating environment (for example network
structure, bandwidth, data load). To this end, the camera simultaneously generates two data
streams (Dual Streaming), which compression settings you can select individually, for example
one setting for transmissions to the Internet and one for LAN connections.
Pre-programmed profiles are available, each giving priority to different perspectives.
You can change individual parameter values of a profile and you can also change the name.
You can switch between profiles by clicking the appropriate tabs.
2018.05 | 1.1 |
Select the mode you wish to use during the day from Marked range drop-down box.
Select the mode you wish to use during the night from Unmarked range drop-down box.
Use the two slider buttons to set the Time ranges.
User Manual
AUTODOME IP 4000i/AUTODOME IP 5000i/
AUTODOME IP 5000i IR
Bosch Security Systems