Table of Contents
Advertisement
10
Ethernet
This chapter explains the operation methods when using iQ Sensor Solution functions for MELSEC iQ-R series or MELSEC
iQ-F series via Ethernet.
System configuration
This section explains the iQ Sensor Solution functions for Ethernet using the following system configuration.
(1)
Type
(1)
Engineering tool
(2)
CPU module
(3)
Graphic operation terminal
Screen design software for
graphic operation terminal
(4)
Device supporting iQSS
(5)
*1 Only the automatic detection function of connected devices supports GOT.
For the information to obtain profiles, please consult your local Mitsubishi representative.
For details on the devices supporting iQSS and the iQ Sensor Solution functions available for Ethernet, refer to the following
section.
Page 325 Devices that Support iQ Sensor Solution
For information on the engineering tools available for iQ Sensor Solution and the versions of engineering tools supporting
each iQ Sensor Solution function, refer to the following section.
Page 337 Engineering Tool and Version List
• Before using each iQ Sensor Solution function, complete the installation and wiring of the actual system
configuration, and set PLC parameters and other settings required for communication with a device
supporting iQSS.
• A device supporting iQSS, which is connected to the tip of a router, does not support.
For details on the settings, refer to the following manual.
MELSEC iQ-R Module Configuration Manual
MELSEC iQ-R Ethernet/CC-Link IE User's Manual (Startup)
Precautions
An error is returned to the request source when an iQ Sensor Solution function via Ethernet and that via a built-in Ethernet
port are performed at the same time.
The following iQ Sensor Solution functions via a built-in Ethernet port cannot be performed at the same time.
• Automatic detection of connected devices
• Reflection of the communication setting
• Sensor/device monitor
• Sensor parameter read/write
• Data backup/restoration
10 Ethernet
278
(2)
(3)
GX Works3
RCPU
*1
GOT2000 series
GT Works3
Laser displacement sensor
COGNEX Vision System
(4)
Model name
SWnDND-GXW3 ('n' indicates its version.)
R08CPU
GT27-VGA
SW1DND-GTWK3
HL-C2
In-Sight EZ-700
(5)
Manufacturer
Mitsubishi Electric
Corporation
Panasonic Industrial
Devices SUNX Co., Ltd.
Cognex Corporation
Advertisement
Table of Contents
