Monitoring Devices Supporting Iqss - Mitsubishi Electric IQSS-R-E Reference Manual

5.4

Monitoring Devices Supporting iQSS

The connection statuses of devices supporting iQSS can be monitored.
Operating procedure
Select
Sensor/device monitor reads a large volume of information from a CPU module at once.
Therefore, the processing speed of the sensor/device monitor function may decrease depending on the set
communication route.
■Display method of a device supporting iQSS, which is connected to a bridge module
(NZ2AW1GFAL) on the "Sensor/Device Monitor for CC IE Field" screen
A device supporting iQSS, which is connected to a bridge module (NZ2AW1GFAL), can be displayed on the "Sensor/Device
Monitor for CC IE Field" screen by the following operation.
Operating procedure
1.
Select a bridge module (NZ2AW1GFAL) in 'List of stations' or 'Device map area' on the "Sensor/Device Monitor for CC IE
Field" screen.
2.
Select [Sensor/Device Monitor]  [Open System Configuration]  [Open AnyWireASLINK Configuration].
1. Select
2. Select
3. Click
List of stations
Device map area
Monitoring Information
window
1.
Select [Diagnostics]  [Sensor/Device Monitor] with an
engineering tool.
2.
Select a CC-Link IE Field Network master/local module in the
"Module Selection (Sensor/Device Monitor)" screen, and click
the [OK] button.
3.
Read the message and click the [Yes] button.
The "Sensor/Device Monitor for CC IE Field" screen appears.
4.
Select a target device supporting iQSS to be monitored in
'List of stations' or 'Device map area' in the "Sensor/Device
Monitor for CC IE Field" screen.
The status of the selected device supporting iQSS is displayed in
the "Monitoring Information" window.
For an error status of a device supporting iQSS,
check with the CC IE Field Diagnostics function.
• [Diagnostics]  [CC IE Field Diagnostics]
 GX Works2 Version 1 Operating Manual
(Common)
5.4 Monitoring Devices Supporting iQSS
5 CC-Link IE Field Network
5
107