Table of Contents
Advertisement
Ethernet cable specifications
Ethernet cables are used for the network communication by Ethernet connection.
By using an Ethernet cable, a vision sensor can directly be connected to a single device, and also can be connected to
multiple devices via a switching hub or a router.
M12X-code, RJ-45 cable
P1: To a vision sensor
• If the bend radius or service loop is smaller than 10 times of the cable diameter, the Ethernet cable
(COGNEX product) may cause cable shielding degradation, cable damage, or wear out in a short period.
The bend radius must be at least 152.4 mm from the connector.
• Cables are sold separately.
3 SPECIFICATIONS
24
3.3 I/O Specifications
P1
Advertisement
Table of Contents
