CEN-TECH 63873 Owner's Manual & Safety Instructions page 7

Attach Wheel Assembly and Foot
1. Lay Charger down.
2. Attach Wheel Assembly:
a. Align Wheel Assembly between
slots and screw holes.
b. Slide solid ends of Brackets (43) into slots.
c. Secure Brackets with two Screws (24).
3. Attach Foot (23) with two Screws (24).
Attach Handle and cable Storage pegs
1. Attach Handle (16):
a. Remove two top screws on each side of Charger.
b. Align Handle with mounting holes.
c. Attach Handle with screws.
Screws
Item 63873
Handle
cable
Storage
pegs
For technical questions, please call 1-888-866-5797.
2. Attach Cable Storage Pegs (26)
with two Screws (27).
Screws
Screw
Screw
Foot
Screw
Screw
bracket
Page 7