Garmin G1000 Reference Manual page 97

6) In the next field, use the small FMS Knob to select the desired settings
upon which to base the new profile. Profiles can be created based on
Garmin factory defaults, default profile settings (initially based on Garmin
factory defaults unless edited by the pilot), or current system settings.
7) Press the ENT Key.
8)
With 'CREATE' highlighted, press the ENT Key to create the profile
Or:
Use the large FMS Knob to select 'CREATE and ACTIVATE' and press the
ENT Key to activate the new profile.
9) To cancel the process, select 'CANCEL' with the large FMS Knob and press
the ENT Key.
Selecting an active profile:
1)
Use the FMS Knob to select the AUX - System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight the active profile field in the Pilot
Profile Box.
4)
Turn the small FMS Knob to display the pilot profile list and highlight the
desired profile.
5)
Press the ENT Key. The system loads and displays the system settings for
the selected profile.
Renaming a profile:
1)
Use the FMS Knob to select the AUX - System Setup 1 Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight 'RENAME' in the Pilot Profile Box.
4) Press the ENT Key.
5)
In the 'Rename Profile' window, turn the FMS Knob to select the profile to
rename.
6) Press the ENT Key.
7)
Use the FMS Knob to enter a new profile name up to 16 characters long
and press the ENT Key.
190-01842-00 Rev. A Garmin G1000 Cockpit Reference Guide for the Piper PA-46 Meridian
Additional Features
79