Nikon COOLPIX B500 Quick Start Manual page 25

4
Smart device: Launch the SnapBridge app and
tap Pair with camera.
When the dialog to select a camera is displayed, tap the
camera you want to connect to.
If you did not connect to the camera by tapping Skip at
the upper-right of the screen when launching the
SnapBridge app for the first time, tap Pair with camera in
the A tab and proceed to step 5.
5
Smart device: In the Pair with camera screen,
tap the camera name.
For iOS, if a dialog explaining the procedure is displayed
when connecting, confirm the details and tap
Understood (if it is not displayed, scroll down the screen).
Tap the camera name again when the screen to select an
accessory is displayed (it may take some time for the
camera name to be displayed.).
6
Camera/smart device:
Confirm that the
camera and smart
device display the
same number (six
digits).
For iOS, the number may
not be displayed on the smart device depending on the OS version. Proceed to step
7 in such cases.
7
Camera/smart device: Press the
k button on the camera and
PAIR in the SnapBridge app.
Auth. code
123456
Confirm that the same authentication
code is displayed on the smart device
and press OK.
Cancel
Connecting to a Smart Device (SnapBridge)
OK
15