Camera Setup - Nikon COOLPIX B500 Quick Start Manual

Camera Setup

Remove the lens cap before turning on the camera.
1
Press the power switch to turn on the camera.
Use the multi selector to select and adjust settings.
Power switch
d button
A language selection dialog will be displayed. Press
HI on the multi selector to highlight a language
and press the k button to select.
The language can be changed at any time using
the setup menu (A22) M Language.
2
When the dialog at right is displayed,
follow the instructions below and press
the d button or k button.
If you will not establish a wireless connection with
a smart device: Press the d button and proceed
to step 3.
If you will establish a wireless connection with a
smart device: Press the k button. See "Connecting
to a Smart Device (SnapBridge)" (A13) for information about the setup procedure.
3
When prompted to set the camera clock, press HI to highlight
Yes and press the k button.
6
Getting Started
Multi selector
Left
k button
(apply selection)
Use SnapBridge to send photos to your
smart device and share them online.
To skip this screen and set SnapBridge
later from the Network menu, press
MENU.
Later Later
Up
Right
Down
Language
Cancel
Set