Configuring A Bluetooth Connection With The Activation Tool - TomTom LINK 105 Installation Manual

Configuring a Bluetooth connection with the Activation Tool

This section describes how to pair your LINK 105 with your LINK 5xx/4xx using the Activation
Tool. You can also configure a Bluetooth connection with WEBFLEET
1. Download the latest version of the Activation Tool from the Partner Portal. Go to
ics.tomtom.com/support
2. Install the latest version of the Activation Tool to your Microsoft Windows
Use the Mini-USB cable from the LINK 5xx/4xx Service Set to connect your LINK 5xx/4xx to
your computer. Alternatively, you can connect your LINK 5xx/4xx with your computer using
Bluetooth.
1. To start the Activation Tool double click the icon.
2. Select the COM port to which you have connected your LINK 5xx/4xx from the list.
Make sure the green LED on the LINK 5xx/4xx is solid on before you continue with the next
step.
3. Click Ok.
4. Select the OBDII-device tab.
5. In the Connection status section select LINK 105.
6. Enter the size of the engine of your vehicle in cc.
and select Activation and Diagnostics.
9
instead.
telemat-
running PC.
©