Table of Contents
Advertisement
7. Enter the power of the engine of your vehicle in kW.
8. Enter the Bluetooth address indicated on the OBD-II connector of the LINK 105 you want to
install in that specific vehicle.
9. Click Save.
You are prompted to enter the activation code for the LINK 5xx/4xx.
10. Enter the activation code.
You can find the activation code in your WEBFLEET contract confirmation.
11. Click Ok.
The entered details for engine size, engine power and Bluetooth address are now shown on
the right.
12. Carry out the steps described above for each additional LINK 105 and LINK 5xx/4xx.
Installing LINK 105 in your vehicle
This section describes how to connect your LINK 105 to the vehicle and to the LINK 5xx/4xx.
10
Advertisement
Table of Contents
