Installation
3.5.2
Assembly with assembly bracket for pipe and wall mounting
Pipe assembly
Wall mounting
Pipe mounting
Wall mounting
Figure 3-22 Mounting possibilities for the assembly bracket
3-20
The assembly bracket is suitable for both pipe and wall mounting.
In pipe assembly the assembly bracket is mounted on the pipe with
both fastening brackets first. Then the transmitter can be fastened with
the two screws provided.
In wall mounting, the assembly bracket is screwed directly to the back
of the transmitter before mounting on the wall. The fastening brackets
and nuts are not needed for wall mounting.
Pre-assembly
154
105
Pre-assembly
SITRANS FM Intermag 2 Flow Transmitter
Operating Manual - A5E00102775-03