Setting Options And Factory Setting - Siemens SITRANS F M Intermag 2 Operating Instructions Manual

Operation
5.2.4

Setting options and factory setting

Menu Device function,
code Parameters
1. Display
1.1 Display Param.
1.1.1 Language
1.1.2 Line 1
1.1.3 Line 2
1.1.4 Display flow
1.1.5 LCD lighting
1.2 Multi-Display
1.3 Flow
1
Parameters apply only to devices with 20 mA/Hart communication and digital output 2
2
Parameters apply only to devices with 20 mA/Hart communication and digital input
SITRANS FM Intermag 2 Flow Transmitter
Operating Manual - A5E00102775-03
The device functions and the parameters are listed below with the
factory setting and setting option. The menu code only appears in the
display of the control and display unit.
Description
Setting parameter for the
local display
Language for user
guidance
Definition of measured
values to be displayed for
line 1 in multi-display
Definition of measured
values to be displayed for
line 2 in multi-display
Selection for type of
presentation of the flow
rate (% and bargraph only
apply to line 2)
Lighting of the display
On: permanently switched
on
Off: automatic switch on
by pressing key,
switch off after 10 min.
Simultaneous display of
two measuring variables
Flow value
Factory setting Setting options
deutsch English,
deutsch,
français,
italiano,
español,
nederlands
Flow Flow, Totalizer
net, Flow
velocity, Analog
1, 2
Val.
Frequency
Totalizer net Flow, Totalizer
net, Flow
velocity, Analog
1, 2
Val.
Frequency
Engineering Unit Engineering
Unit, %,
bargraph in %
Off On
Off
(actual Menu 1.1.2
measured value
line 1 1) Menu 1.1.3
(actual
measured value
line 2)
(actual
measured
value)
(7ME5033-0xxxx)
(7ME5033-2xxxx)
,
,
5-9