Cisco cBR-8 Configuration And Troubleshooting Manual page 14

Hardware Compatibility Matrix for the Cisco cBR Series Routers
Hardware Compatibility Matrix for the Cisco cBR Series Routers
The hardware components that are introduced in a given Cisco IOS-XE Release are supported in all
Note
subsequent releases unless otherwise specified.
Table 1: Hardware Compatibility Matrix for the Cisco cBR Series Routers
Cisco CMTS Platform
Cisco cBR-8 Converged
Broadband Router
Prerequisites for Call Home
• Contact email address (required for full registration with Smart Call Home, optional if Call Home is
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
2
enabled in anonymous mode), phone number (optional), and street address information (optional) must
be configured so that the receiver can determine the origin of messages received.
Processor Engine
Cisco IOS-XE Release 16.5.1 and
Later Releases
Cisco cBR-8 Supervisor:
• PID—CBR-SUP-250G
• PID—CBR-CCAP-SUP-160G
• PID—CBR-CCAP-SUP-60G
• PID—CBR-SUP-8X10G-PIC
Call Home
Interface Cards
Cisco IOS-XE Release 16.5.1 and
Later Releases
Cisco cBR-8 CCAP Line Cards:
• PID—CBR-LC-8D30-16U30
• PID—CBR-LC-8D31-16U30
• PID—CBR-RF-PIC
• PID—CBR-RF-PROT-PIC
• PID—CBR-CCAP-LC-40G-R
Cisco cBR-8 Downstream PHY
Modules:
• PID—CBR-D30-DS-MOD
• PID—CBR-D31-DS-MOD
Cisco cBR-8 Upstream PHY
Modules:
• PID—CBR-D30-US-MOD
• PID—CBR-D31-US-MOD