Compliance And Certifications - Schwinn 9-7300 A.C. Power Owner's Manual

Compliance and Certifications

FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Note: That changes or modifications not expressly approved by the party responsible for compli-
ance could void the user's authority to operate the equipment.
FCC ID: 06RFIT1
DO NOT dispose of this product as refuse. This product is to be recycled. For information on the
proper method of disposal, contact a Customer Service representative. Contact information is avail-
able in the Contacts section of this manual. For additional information, please visit: www.SchwinnE-
quipment.com.
• This console is for indoor use only.
• This device conforms to European safety standards
• This console is ANT+ certified.
NOTE: The users' device must be ANT+ compatible and capable of receiving the data files broadcast
by the ANT+ chip. Users should consult with the documentation for their device, or check the ANT+
website at www.thisisant.com for compatibility.
Patent Information: This product may be covered by US and foreign patents and patents pending.
Page 7