Advertisement
Quick Links
Instructions
Set Dark Switch to Dark ON.
Set Sensitivity near Max.
Wire Red & Black to Power.
Wire White to C1.
Wire Green to NO1.
Loosely Mount Photo Eye.
Solidly Mount Reflector, level
with the Photo Eye's Lens.
Tip Photo Eye Up & Down, Side
to Side, until Red changes to
Yellow to determine Horizontal
& Vertical Center. Tighten.
Normal
OMRON E3K
Reflector Type Photo Eye
(24 to 240 VAC or VDC)
UL 325 Compliant
Sensitivity
LIGHT STATUS
In Dark On Mode
If unit is in Light On Mode,
the Red & Yellow LED's
are the OPPOSITE.
Green =
Power On &
Aim is Stable
Red =
Unit "Sees"
the Reflector
Yellow =
Unit Does Not
"See" the
Reflector
Dark Switch
Wiring
Unit thinks there
is an obstruction,
aim is off or the
reflector is bad.
Advertisement
