Editing Using Only The Jv-1010; Making Part Settings (Part) - Roland JV-1010 Owner's Manual

Editing Using Only the JV-1010

Making Part Settings (PART)

fig.1-30
Now try changing the level setting (Level) for PART 2 in Performance
mode.
fig.1-30a
1
Press the VALUE knob to choose the Performance mode
(PERFORM).
Pressing the VALUE knob makes the mode change sequentially. Press the
knob several times, until the PERFORM indicator lights up.
2
While holding down the VOLUME knob, press the VALUE
knob.
Switch to the Edit mode.
3
Turn the CATEGORY/BANK knob to choose USER (Level).
4
Turn the PART knob and choose 2.
In Edit mode, you can select USER (Level) with the CATEGORY/BANK
knob to change the volume level setting for each part.
44
4 2,6 1,5 3
When in the Patch mode,
you can't enter the Edit
mode.
For more information
about the CATEGORY/
BANK knob's other
functions in Edit mode,
refer to the EDIT
PARAMETER SELECT
chart on the JV-1010's top
panel.