Roland JV-1010 Owner's Manual page 30

Choosing and Playing Patches
To play rhythm sets using a MIDI keyboard, set the MIDI transmit channel
for the MIDI keyboard to 10.
Here's how you can play percussion instruments using rhythm sets:
fig.1-19
1
Set the transmit channel for the MIDI keyboard (the
transmitting instrument) to 10.
For information on how to make the settings, refer to the owner's manual
for the MIDI keyboard (the transmitting instrument).
2
Press the VALUE knob and choose the Rhythm Set mode
(RHYTHM).
Pressing the VALUE knob makes the mode change sequentially. Press the
knob several times until the RHYTHM indicator lights up.
3
Turn the CATEGORY/BANK knob and choose a bank. Make
your selection from the text displayed in white.
fig.1-20
4
Turn the VALUE knob and choose a rhythm set.
5
Finger some keys on the MIDI keyboard to play a few notes.
A wide variety of percussion sounds are played, depending on the keys you
finger.
When MIDI data is received, the MIDI indicator lights up.
30
2,4 3
You can't choose a WAVE-
EXP patch unless a Wave
Expansion Board is
installed in the slot EXP-B.
When no Wave Expansion
Board is installed, - - -
appears on the display.
When you've selected the
Rhythm Set mode, the
display shows the settings
for Part 10, no matter what
setting the PART knob is at.
For more information
about the onboard rhythm
sets, take a look at
"Rhythm Set List" (p. 64).