Preparing Hui Operation; Setting Up Control Surface Mode In Protools - Roland VS-2480CD Control Surface Mode Manual

2—Preparing Your Computer Software
3. Click Generic Remote. The window expands to show additional options.
4. Select the MIDI input and output jacks, or "ports," to which the VS-2480CD is
5. Click Import.
6. Navigate to the s124v6 file, select it click Open.
7. Click Apply and then OK.

Preparing HUI Operation

The VS-2480CD's HUI template makes the VS-2480CD act like a Mackie HUI control
surface that can control digidesign's ProTools as well as Mark of the Unicorn's
Performer. Neither program requires installation of a driver to work with the
VS-2480CD's Control Surface mode. Both programs require configuration.

Setting Up Control Surface Mode in ProTools

1. From the Setups menu, select Peripherals.
12 www.RolandUS.com
connected.
The Peripherals window appears.
Import button
Roland VS-2480 Control Surface Mode Guide