Special Key Operations - Roland VXpanded VS-880 Owner's Manual

Special key operations

Here is a list of the functions that can be performed by pressing multiple buttons, or by using the TIME/VALUE dial in con-
junction with a button.
MIXER MODE buttons
[SHIFT] + [SELECT]
CH EDIT buttons
[SHIFT] + [Input/BUSS (CH EDIT)]
[SHIFT] + [V.Track (CH EDIT)]
[SHIFT] + [EQ Low (CH EDIT)]
[SHIFT] + [EQ Mid (CH EDIT)]
[SHIFT] + [EQ Hi (CH EDIT)]
[SHIFT] + [AUX Send (CH EDIT)]
[SHIFT] + [EFFECT-1 (CH EDIT)]
[SHIFT] + [EFFECT-2 (CH EDIT)]
[SHIFT] + [SOLO (EDIT)]
EDIT CONDITION buttons
[SHIFT] + [SYSTEM]
[SHIFT] + [SONG]
[SHIFT] + [EFFECT]
Transport control buttons
[SHIFT] + [STORE (ZERO)]
[SHIFT] + [SONG TOP (REW)]
[SHIFT] + [SONG END (FF)]
[SHIFT] + [SHUT/EJECT (STOP)]
[SHIFT] + [RESTART (PLAY)]
[REC] + [STATUS]
[STOP] + [STATUS]
LOCATOR buttons
[SHIFT] + LOC button
[CLEAR] + LOC button
[SHIFT] + [CLEAR] + LOC button
[SHIFT] + [TAP]
[CLEAR] + [TAP]
[SHIFT] + [CLEAR] + [TAP] [YES]
[LOCATOR] + [LOC1/5]Ð[LOC4/8]
[TRACK] + [LOC1/5]
[TRACK] + [LOC2/6]
[TRACK] + [LOC3/7]
[TRACK] + [LOC4/8]
SCENE button
[SCENE] + [SELECT]
[SCENE] + [TAP]
[SCENE] + [PREV]
[SCENE] + [NEXT]
[SCENE] + [REC]
136
Switch between INPUT TRACK mode and INPUT MIX / TRACK MIX mode
To the input select setting page (in INPUT TRACK mode)
To the buss select setting page (in INPUT MIX / TRACK MIX mode)
To the V-track setting page (in INPUT TRACK / TRACK MIX mode)
To the equalizer low gain / frequency setting page
To the equalizer mid gain setting page (in INPUT TRACK mode)
To the equalizer high gain / frequency setting page
To the AUX switch setting page
To the effect 1 switch setting page (if a VS8F-1 is installed)
To the effect 2 switch setting page (if a VS8F-1 is installed)
Solo function on/off
Switch sync sources
Display various information about the song.
Switch between the effect select page, effect name page, and effect on/off page.
Store song data to the disk drive
Move to the time where the first sound of the song is recorded
Move to the time where the last sound of the song is recorded
Shut-down
Re-start (after shut-down)
Switch the track status to REC (indicator blinks red)
Switch the track status to PLAY (indicator lights green)
Register a locate point 5Ð8
Clear the setting of a locate point 1Ð4
Clear the setting of a locate point 5Ð8
To the Tempo Map setting page
Erase a mark point
Erase all mark points
Switch locate banks.
Direct input of Start point
Direct input of End point
Direct input of From point
Direct input of To point
Auto mix on/off
Execute snapshot
Gradation to mixer settings of previous mark point
Gradation to mixer settings of next mark point
Auto Mix realtime recording