Table of Contents
Advertisement
Playing the Organ
Dividing the Keyboard (Split)
You can divide the keyboard into two zones, and assign the upper part sound of the
organ voice to the right-hand zone, and the lower part sound of the organ voice to
the left-hand zone.
This is called "split," and the location at which the keyboard is divided is called the
"split point." The split point is included in the Upper part.
fig.01-36
Lower Part
At the factory settings, the split point is set to "C4" (middle C).
fig.01-37
1, 2
1
Press the [SPLIT] button to make its indicator light.
The keyboard will be divided into two zones.
The right-hand keyboard zone will play the Upper organ part, and the left-hand
keyboard zone will play the Lower organ part.
2
To cancel the Split, press the [SPLIT] button once again, extinguishing
the indicator.
Changing the Split Point
You can change the location (Split Point) at which the keyboard will be divided.
1
Hold down the HARMONIC BAR PART [UPPER] and [PEDAL] buttons
and press the [SPLIT] button.
2
Press the key that you want to specify as the split point.
3
Press the [WRITE] button to finalize the split point.
The split point will be set.
38
Split Point
Upper Part
You are free to change the split
point.
When you hold down the
HARMONIC BAR PART
[UPPER] and [PEDAL] buttons
and press the [SPLIT] button,
the [SPLIT] button and the [1]–
[3] buttons will blink. At this
time, press one of the [1]–[3]
buttons to select the part that
will play Other Tones (p. 57).
Advertisement
Table of Contents
