Stop Button; Exit Button; Enter Button - Roland Edirol R-1 Owner's Manual

The R-1's controls and connectors
fig.panel-2
17
18
19
20
21
11

STOP button

This button stops playback or recording.
12
PLAY/PAUSE button
This button starts playback. It also pauses recording or playback.
If you press this button while playing, playback will pause, and the R-1's display will
indicate PLAY-PAUSE. Press the PLAY/PAUSE button once again to resume
playback.
Similarly, if you press this button while recording, recording will pause. The R-1's
display will indicate REC-PAUSE, and the REC button will blink red.
To resume recording from the Rec Standby condition, press the REC button once again
(or press the PLAY/PAUSE button). The REC button lights red during recording.
13
REC button
When stopped, pressing the REC button will put the R-1 in recording-standby mode.
The R-1's display will indicate REC STANDBY, and the REC button will blink red.
To begin recording from recording-standby mode, press the REC button once again (or
press the PLAY/PAUSE button). During recording, the REC button will light red.
14
VALUE dial
Use this dial to select songs, to specify effect types and values, and to select setup mode
items.

EXIT button

Use this button to return to the previous item in Effect Edit or Setup mode. In Setup
mode, your value changes will be cancelled if you press the EXIT button before
pressing the ENTER button.

ENTER button

Use this button to select an item or finalize a change in Effect Edit or Setup mode.
14
1
2
3
4
5
7
8
11
12
6
9
10
13
14
15
16