Connecting To Audio Equipment; Connectors; Making The Connections - Roland KR7/5 Owner's Manual

Chapter 9 Connecting External Devices
Connecting to Audio
Equipment
When you connect the KR-7/5 to audio equipment, you can
play the sounds from the KR-7/5 through the speakers on
the audio equipment or record your performances on a tape
recorder or other recording device.
When connecting, please use audio cables (sold separately)
with standard phone plugs.

Connectors

fig.09-
Input
L ( Mono )
R
Stereo
Output Jacks
You can connect audio equipment using audio cables (sold
separately) and play the sounds from the KR-7/5 through the
speakers on the connected equipment, or record your
performances on a tape recorder or other recording device.
If the input of the connected device is monaural, you must
use the L (Mono) jack.
Input Jacks
You can connect another sound source, such as audio
equipment or an electronic instrument, using audio cables
(sold separately). Play the sounds from the connected device
through the speakers on the KR-7/5.
If the input of the connected device is monaural, you must
use the L (Mono) jack.

Making the Connections

* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing Sounds from the KR-7/5 Through the
Speakers on Audio Equipment or Recording Your
Performances on a Recording Device
fig.09-
KR-7/5
MIDI
Out In Pedal
1.
Turn the volume all the way down on the KR-7/5 and
on the device you're about to connect.
162
Output
L ( Mono )
R
Stereo
Input R/L
(Line In, Aux In)
Input Output
R L(Mono) R L(Mono)
Stereo Stereo
2.
Turn off the power to the KR-7/5 and other connected
equipment.
3.
Use audio cables (sold separately) to make the
connection.
4.
Switch on the KR-7/5.
5.
Switch on the connected device.
6.
Adjust the volume level on the KR-7/5 and the
connected device.
Recording KR-7/5 Performances on a Recording Device
7.
Start recording with the connected device.
8.
Play the keyboard.
9.
When the performance ends, stop recording on the
connected equipment.
Playing Audio Equipment Sounds Through the
Speakers on the KR-7/5
fig.09-
KR-7/5
MIDI
Out In Pedal
1.
Turn the volume all the way down on the KR-7/5 and
on the device you're about to connect.
2.
Turn off the power to the KR-7/5 and other connected
equipment.
3.
Use audio cables (sold separately) to make the
connection.
4.
Turn on the connected equipment.
5.
Turn on the KR-7/5.
6.
Adjust the volume level on the KR-7/5 and the
connected device.
After use, turn off the power using the following procedure.
1.
Turn the volume all the way down on the KR-7/5 and
on the device you're about to connect.
2.
Turn off the KR-7/5.
3.
Turn off the connected equipment.
Output R/L
(Line Out)
Input Output
R L(Mono) R L(Mono)
Stereo Stereo