Roland KR7/5 Owner's Manual page 147

Assigning Functions to Pedals
and Performance Pads (Pedal
Setting/User Functions)
You can assign a variety of functions to the left and center
pedals and to the performance pads.
You can call up the assigned functions just by pressing the
corresponding pedal or pad.
Assigning Functions to Pedals
At Step 3 "Procedure" (p. 145), touch <Pedal Setting>.
fig.d-pedalset.eps_50
Touch to assign functions to each of the pedals.
* Pressing the One Touch Program [Piano] button restores the
piano performance functions to the pedals (p. 20).
Assigning Functions to Performance Pads
<KR-7>
1.
Press the [User Function] button and watch the
indicator light up.
A screen like the one shown below appears.
fig.d-usrfunc.eps_50
2.
Touch to assign functions to each of the
Performance Pads.
If you set the pedal as a dedicated switch for selecting User
Programs, the function assigned to the pedal cannot be used.
Refer to "Using the Pedal to Switch User Programs" (p. 116).
Chapter 8 Various Settings
<KR-5>
1.
Press the [Style Orchestrator/User Function]
button and the indicator light goes out.
A screen like the one shown below appears.
fig.d-usrfunc.eps_50
2.
Touch to assign functions to each of the
Performance Pads.
If you set the pedal as a dedicated switch for selecting User
Programs, the function assigned to the pedal cannot be used.
Refer to "Using the Pedal to Switch User Programs" (p. 116).
147