Kodak 9000 User Manual page 49

6. Click on the Control Panel to turn ON the positioning laser beams. Adjust the
patient using the following 2 positioning laser beams:
•
The mid-sagittal (1) positioning laser beam
•
The 3D FoV (2) positioning laser beam
7. Press and hold
laser beam. Tighten the temple supports (3).
8. Ask the patient to close the eyes, to remains still and to breath through the nose.
NOTE
You can re-activate the laser positioning beams as needed. You can
press the same button to turn OFF the laser beams, or wait 60 seconds
for the beams to turn OFF automatically.
2
to align the upper or lower jaw with the 3D FoV (2) positioning
1
3
KODAK 9000 3D Extraoral Imaging System_User Guide (SM710)_Ed 01
Acquiring a 3D Image
5–9