Changing The Amount Of Surround Effect - Roland KR-115 Owner's Manual

Chapter 1 Performance
fig.d-adv3dopt.eps_60
4.
Touch <All Parts> or <Layer Part>.
Display
The effect is applied to all tones played with the keyboard (the left-
All Parts
hand tone, right-hand tone, and layer tone).
The effect is applied only to the layer part.
When not using a layer performance (p. 31), the Surround effect is not
Layer Part
applied to the keyboard performance, even if <Keyboard> on the
Surround Screen is set to On.
When you press the [Exit] button, you return to the Surround Screen.

■ Changing the Amount of Surround Effect

1.
Press the [Surround/Reverb] button and watch the indicator light up.
2.
Touch <Surround> to display the Surround screen.
3.
On the Surround Screen, press the [Option] button.
Touch
fig.d-adv3dopt.eps_60
4.
Touch the "Int" and "Ext" sliders to adjust the volume levels of the
external speaker and the KR's speaker.
When you press the [Exit] button, you return to the Surround screen.
38
Explanation
to display the following screen.
This setting is enabled only
when the <Surround> type
icon is selected.