Adjusting The Piano Designer Resonance; Disabling Functions Other Than Piano Performance (Panel Lock) - Roland KR-115 Owner's Manual

Adjusting the Piano Designer
Resonance
You can made precise changes to the Piano Designer
"Resonance" setting.
More of the resonance effect is applied as the value is
increased.
1.
Press the [Piano Designer] button.
2.
Press the [Option] button.
A screen like the one shown below appears.
fig.d-touchpanel.eps_50
3.
Touch of each item to make settings.
Item
With an acoustic piano, playing a
note causes the strings for other keys
already being pressed to resonate.
String
The function that reproduces this
resonant sound is called "String
Resonance."
When the damper pedal on an
acoustic piano is pressed, the sound
of the key that is played causes other
strings to resonate, adding rich
Damper reverberation and breadth to the
sound. This function reproduces the
resonant sound created by pressing
the damper pedal (Damper
Resonance).
This reproduces the "key off" sound
(the subtle sound made when the
Key off
keys are released) produced when
playing an acoustic piano.
Explanation
Chapter 10 Various Settings
Disabling Functions Other
Than Piano Performance
(Panel Lock)
The "Panel Lock" function locks the KR in a state where only
piano performance can be used, and all buttons will be
disabled. This prevents the settings from being inadvertently
modified even if children press the buttons accidentally.
* In the Panel Lock state, only the grand piano sound can be
played.
1.
Turn down the volume all the way.
2.
Press the [Power] switch to turn off the power.
3.
While holding down the [Wonderland/Game] button,
press the [Power] switch and turn on the power.
Hold down the button for at least ten seconds (until the
animation is displayed).
All buttons except for piano play are disabled.
Adjust the volume. When you play the keyboard, the
grand piano sound will be heard.
To undo the Panel Lock function, turn the volume down
to the minimum, and turn on the power once again.
181