Assigning Functions To Pedals And Performance Pads; User Functions) - Roland KR-115 Owner's Manual

■ Assigning Functions to Pedals
and Performance Pads
(Pedal Setting/User Functions)
You can assign a variety of functions to the left and center
pedals, the expression pedals, and the performance pads.
You can call up the assigned functions just by pressing the
corresponding pedal or pad.
925
* Use only the specified expression pedal (EV-7/5; sold
separately). By connecting any other expression pedals, you
risk causing malfunction and/or damage to the unit.
❍ Assigning Functions to Pedals
At Step 3 "Procedure" (p. 165), touch <Pedal Setting>.
fig.d-pedalset.eps_50
Touch to assign functions to each of the pedals.
→ Pressing the One Touch Program [Piano] button restores the
piano performance functions to the pedals (p. 22).
❍ Assigning Functions to Performance Pads
1.
Press the [User Function] button and watch the
indicator light up.
A screen like the one shown below appears.
fig.d-usrfunc.eps_50
2.
Touch to assign functions to each of the
Performance Pads.
→ If you set the pedal as a dedicated switch for selecting User
Programs, the function assigned to the pedal cannot be used.
Refer to "Using the Pedal to Switch User Programs" (p. 134).
Chapter 10 Various Settings
❍ Functions that Can be Assigned (Pedals,
Performance Pads)
Function
Toggles the Leading Bass function* on or
off. The function stays on as long as the
pedal to which this is assigned is pressed.
Leading
Bass When assigned to a Performance Pad, this
is alternately switched on and off each time
the pad is pressed.
Only the Rhythm part is played. After No
Chord is switched on, specifying a chord
No Chord by playing the actual keys cancels the
function, and all of the accompaniment
parts are played.
During the performance of Automatic
Break Accompaniment, the accompaniment
stops for one measure only.
Performs the same function as the Fill In
Fill In to
Variation [To Variation] button (p. 68).
Fill In to Performs the same function as the Fill In
Original [To Original] button (p. 68).
A fill-in is inserted, but the accompaniment
Fill In
pattern after that doesn't change.
This plays a fill-in half a measure long,
Half Fill In to
then switches to the Variation
Variation
accompaniment pattern.
This plays a fill-in half a measure long,
Half Fill In to
then switches to the Original
Original
accompaniment pattern.
Original/ This changes the accompaniment pattern
Variation without inserting a fill-in.
When this function is used during
Arranger Automatic Accompaniment, the
accompaniment returns to the beginning of
Reset
the Division (p. 57).
Performs the same function as the [Intro/
Intro 1/
Ending] button (p. 65). Intro 1 and Ending
Ending 1
1 are played.
Performs the same function as the [Intro/
Intro 2/
Ending] button (p. 65). Intro 2 and Ending
Ending 2
2 are played.
Performs the same function as the [Start/
Arranger
Start/Stop Stop] button (p. 65).
Orchestrator This changes the accompaniment to a more
elavorate arrangement (p. 69).
Up
Orchestrator Changes the accompaniment to a simpler
Down arrangement (p. 69).
Turns the Melody Intelligence function on
Melody
Intelligence and off (p. 70).
Explanation
167