Panel Descriptions; Front Panel; Rear Panel - Roland HP-1 Owner's Manual

2. Panel descriptions

Panel descriptions

2.1 Front panel

B
Power
A
A [Power] switch
Turns the power on/off.
B [Volume] knob
Adjusts the overall volume level.
C [Demo] button
Allows you to play back the 65 pieces the HP-1 con-
tains. By pressing it simultaneously with the [Reverb]
button, you access the HP-1's Function mode (p. 12).

2.2 Rear panel

A MIDI Out/In connectors
Connect to external MIDI devices to exchange perfor-
mance data.
B Output jacks
Allows you to connect the HP-1 to sound reinforce-
ment equipment to obtain a more powerful sound.
They can also be connected to a tape recorder or other
recording device to record a performance.
6
C D
A
E
D [Reverb] button
This button has three functions. By pressing it, you
switch the Reverb effect on and off.
By holding it down while pressing a Tone button
([Piano 1]~[Strings]), you select the alternative for
the currently active Tone.
If you press it together with the [Demo] button, you
access the HP-1's Function mode.
E Tone select buttons
These buttons are used to assign the desired sound (or
"Tone") to the keyboard.
B C D
C Input jacks
These jacks can be connected to another sound gener-
ating device, or an audio device, so that the sound of
that device will be output via the HP-1's speakers.
D Pedal connector
Connect the pedal cable of the special stand to this
socket.