JVC UX-TB30B Service Manual page 8

3.2 CD unit (Used model is UX-TB30E)
3.2.1 Removing the Top cover (See Fig.1, 2)
(1) Tear off the Rubber foots. (See Fig.1)
(2) Remove the four screws A attaching the Top cover. (See
Fig.1)
Rubber foot
A
(3) Remove the five screws B and two screws C attaching the
Rear cover. (See Fig.2)
B
B
C
3.2.2 Removing the Front panel (See Fig.3, 4, 5)
(1) Disconnect the connector wire from USB board connected
to connector CN603 of the CD board. (See Fig.3)
(2) Disconnect the connector wire from Control board connect-
ed to connector CN703
CN603
1-8 (No.MB725<Rev.001>)
Fig.1
Fig.2
of the Equalizer board. (See Fig.3)
CN703
Fig.3
(3) Remove the two screws D attaching the Front panel. (See
Fig.4)
A
(4) Disengage two hooks a engaged both side of the Front
panel. (See Fig.5)
a
hook
D
Fig.4
Fig.5